Double Glazing Lock Repairs
The best locks for your windows and doors will help prevent burglars from getting into your home. In general, they don't enjoy breaking glass or trying to wiggle through windows that are open.
However, some double-glazing owners have had issues with their door lock or window lock after it was installed. Fortunately, these issues can be fixed without having to pay for new double glazing.
Broken or damaged locks
If your uPVC door or window lock is damaged or defective and requires a locksmith, they can fix it for you. They can fix hinges, striker plates, and locks for your double glazing. They can also adjust the cylinder in order to fix any misalignment that could be causing your handle not to work properly.
The mechanism may be locked when the key is inserted into the lock, but it does not turn or be difficult to insert. Dirt or grease can get stuck in the mechanism. If this is the situation it is possible for the lock to be cleaned and lubricated. It is important to apply a dry lubricant such as teflon or graphite instead of oil which can attract dirt and adhere to the inside of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant must be absorbed into the mechanism, and the lock should turn effortlessly.
The loose screws inside the lock mechanism are another cause of a faulty lock. They can loosen and fall out or break off completely and stop the lock from working correctly. These screws can be tightened with a screwdriver, but be careful not to over tighten them. This could damage the internal components.
A damaged lock can be dangerous for your family and you. This is particularly relevant if you have young children. It's possible for them to open the door without you knowing and thus give them access to your home. If you're concerned that this could occur, a professional locksmith can assist you secure the double-glazed doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and damaged mechanisms on uPVC doors and windows. We can also reconfigure the locking system on your uPVC windows or double glazing to meet your needs. This means that replacement doors and/or windows are not always required.
Handles that are broken or damaged
A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is a great choice for those who are concerned about burglars who are opportunistic and trying to gain access to their home. It is also a good idea to ask your locksmith about anti-lift blocks, these can be fitted on top of the locks that are already in place to will keep your window secured in its closed position.
It's not uncommon for handle locks to get damaged or fail. They are the first part of your window to be forced open by criminals intent on breaking in. The good news is that this is one of easiest parts to repair.
Modern handles made of aluminium and uPVC have a multi-point locking mechanism known as Espagnolette that is designed to withstand forced entry. This security upgrade is offered as an option on new uPVC windows. As an optional upgrade older style handles made of aluminium or uPVC that are no longer in use can be upgraded to the shoot bolt locking system.
If a handle is damaged, it is essential to get the handle repaired as quickly as possible. A damaged handle can stop the window from closing properly and letting in a draft. It could also be a vulnerability that opportunistic thieves could take advantage of and put your family's possessions and your personal belongings at risk.
The process of fixing the failed mechanism starts with getting access to the window frame and then removing the damaged handle. The gearbox that opens the handle is removed and the type of gear is identified so that a replacement can be sourced which matches the profile of internal window frame mechanisms.
After the mechanism has been replaced, the handle may be returned to the original screws. However, we recommend replacing them with longer screws to ensure an even more secure fit. The final step is to seal the handle with a clear sealant. This will shield it from further corrosion. After that, your window will be fully operational again, and at only a fraction of the cost of replacing the entire window.
Hinges that are broken or damaged
If your windows do not shut properly, you could experience double glazed near me draughts, an affliction of your home's security barrier and a higher chance of damp or water damage. Windows hinges that break or become faulty are a common occurrence and can be easily repaired.
If your windows made of uPVC won't open or close, it is likely that hinges need to be replaced or repaired. Many window companies will require that you purchase a new window unit to fix this simple issue, but we are able to replace the hinges in order to save you money.
Window hinges are often damaged after repeated use, or they may be weakened due to corrosion over time. If you find a broken hinge, it's crucial to take steps to prevent further damage by being careful not to force the window to open or close.
You can locate the appropriate parts for your here hinge by identifying the type of hinge it is. Maco, Mila and Roto are all manufacturers of window hinges. Get advice from a professional before buying parts that do not fit with your existing hardware. This could cause more damage.
A faulty hinge is a major issue for uPVC doors and windows. They can be a major source of noise, and they can also allow for water infiltration which could damage your windows.
To fix this issue, first make sure whether the pin barrel on both hinge halves is aligned. If it isn't, tap the head pin using the hammer to create a small bend in the hinge barrel. This will help keep the pin in place. Have a person hold the doors as you take out hinge screws and hinges. Replace the hinges and then install screws using glue. Finally fix the hinges using clamps or weights while the glue sets.
Once your hinges are repaired after which you will be able to re-install the door and re-attach the handle. It is recommended to replace the screws using the same length of wood dowels as the original screw, so that they match up with each the other.
Glass that is damaged or damaged
uPVC Windows can be damaged over time, even though they are great at keeping cold out and keeping the heat. This could include damaged or broken glass and defective locks. This is a problem that can be very expensive should it be neglected. It can also affect the aesthetics of your house and can lead to loss of insulation, which is why it's crucial to repair any damage as soon as possible.
If your glass has broken but isn't shattered it is usually possible to repair it yourself using the right tools and methods. First, make sure the area surrounding the glass is clean so that any shards don't cause injury read more to anyone or are an accident hazard. Remove the broken glass pieces and dispose of them in the proper way. Then, apply masking tape over the entire area to prevent pieces of glass from scattering and sticking to your skin when you move them. Pre-fitting the glass pane before adhering it to the wall is a good idea in the case of windows with two panes. This will ensure that you have enough room to finish your project.
Use a clean, dry cloth to wipe clean the surface of the broken glass and the frame prior to applying the glue. Follow the curing and application instructions, which may vary from product-to-product. You may need to clamp the cracked glass with clamps made of lightweight materials designed to hold delicate materials, depending on the angle.
When the adhesive has completely cured, carefully reinstall the glass in the window frame, ensuring it's flush with the edge of the frame, and there are no gaps between the glass and the window sash. Avoid flexing the glass as you here reinstall it, as this could weaken the seal. This could result in water infiltration or condensation.
Get in touch with a double glazed windows near me professional glazier, such as O'Brien(r) for an appointment to replace your glass if the window has been completely broken. If you leave broken glass unattended, it could cause danger to pet and children, so it's essential to act fast.